Catálogo de Productos

Feedthrough terminal block; 4 mm²; Pin spacing 7 mm; 5-pole; CAGE CLAMP®; 4,00 mm²; gray

Feedthrough terminal block; 4 mm²; Pin spacing 7 mm; 6-pole; CAGE CLAMP®; 4,00 mm²; gray

Feedthrough terminal block; 4 mm²; Pin spacing 7 mm; 7-pole; CAGE CLAMP®; 4,00 mm²; gray

Feedthrough terminal block; 4 mm²; Pin spacing 7 mm; 8-pole; CAGE CLAMP®; 4,00 mm²; gray

Feedthrough terminal block; 4 mm²; Pin spacing 7 mm; 9-pole; CAGE CLAMP®; 4,00 mm²; gray

Feedthrough terminal block; 4 mm²; Pin spacing 7 mm; 10-pole; CAGE CLAMP®; 4,00 mm²; gray

Feedthrough terminal block; 4 mm²; Pin spacing 7 mm; 11-pole; CAGE CLAMP®; 4,00 mm²; gray

Feedthrough terminal block; 4 mm²; Pin spacing 7 mm; 12-pole; CAGE CLAMP®; 4,00 mm²; gray

Feedthrough terminal block, lever, gray

Feedthrough terminal block; lever; Plate thickness: 3 mm; 16 mm²; Pin spacing 11.5 mm; 4-pole; CAGE CLAMP®; 16,00 mm²; gray

BUS Cables Profibus PA fixed installed, 1x2x1.0/2.55 mm Copper, bare (AWG 18/1).

CABLE SIMILAR TO 1492-CABLE005P

CABLE SIMILAR TO 1492-CABLE010P

CABLE SIMILAR TO 1492-CABLE025P

CABLE SIMILAR TO 1492-CABLE005Q

CABLE SIMILAR TO 1492-CABLE025Q

CABLE SIMILAR TO 1492-CABLE050Q

flat ribbon cable w/ 20 pin IDC connectors on each end, 0.5 meter long.

flat ribbon cable w/ 20 pin IDC connectors on each end, 1 meter long.

flat ribbon cable w/ 20 pin IDC connectors on each end, 12" long.

0.5 meter MODULE POWER BUS JUMPER Cable for connecting 24 VDC power to WAGO I/O IFM

1.0 meter MODULE POWER BUS JUMPER Cable for connecting 24 VDC power from one WAGO IFM to an adjacent WAGO IFM

0.5M FLY LEAD CABLE 20P

1.0M FLY LEAD CABLE 20P

2.5M FLY LEAD CABLE 20P

1.0M 2X 8 CH 753 CABLE 20P

20-pin IDC header module with terminal marking to match A.B. module 1492-IFM20FN

Interface module for use with WAGO 750-1400, 16-point digital input module, high side switching, feed through with LED indication